Icontrol Networks Piper Z-Wave Water Sensor - Review 2022
Having a continued water sensor tin mean the difference between dropping a couple of bucks to switch out a faulty water valve and spending thousands of dollars to repair or replace household appliances and other items that sustain water impairment due to a faulty h2o valve. The Piper Z-Wave H2o Sensor ($39.95) from Icontrol Networks will non only ship push notifications to your Android or iOS smartphone when information technology detects h2o, it'll alarm your trusted friends and relatives and phone call your phone to allow you know that you have a problem. It'll cost you more than you'll pay for a non-connected sensor and the setup process is a little quirky, but information technology'due south a handy device if you live in a flood-prone expanse and have already invested in the Piper home-automation network.
Design and Features
The white plastic Piper Water Sensor measures 3.0 past 1.2 by 0.7 inches (HWD) and is connected to an approximately three.v-foot cable with a two-pronged probe at the end that detects the presence of water. There'due south a small button on the pinnacle that releases the back console, providing access to ii AAA batteries, a Wake-Up button, and a Z-Moving ridge button. The Wake-Up button is used to prepare the sensor for pairing, and the Z-Moving ridge button is used to pair it to the Piper's Z-Wave radio. A blood-red LED indicator on the front of the sensor lets you lot know when it'southward prepare for pairing.
When paired with a Piper hub, such as the Piper NV, the Water Sensor can be configured to interact with the NV's camera and siren also as other connected accessories such as the Piper Z-Moving ridge LED Bulb. Simply go to the Rules page of the app and select the 'If Water Sensor Detects Water' option. On the next page you lot can choose options including triggering video recording, sounding the siren, and turning on the LED low-cal bulb. If you take a Piper Smart Switch, you tin prepare it upwards and then the sensor trigger turns on your sump pump, a fan, or a heater. The sensor, when triggered can too generate a telephone phone call, and send email, text, and push notifications to your smartphone and to Piper Trusted Circle members that yous designate.
Installation and Performance
The sensor tin exist mounted on a wall using double-sided tape or screws (both included). If y'all're using the screws, popular the dorsum console off and screw information technology to the wall, so reattach the sensor to the console. Mount the sensor at a height that allows the probe to come in contact with the water (in nearly cases this will be at or just above floor level). Use the included waterproof mounting tape to attach the probe to the wall. The probe itself is waterproof simply the sensor is non, so brand certain it is shielded from the elements if you install it outdoors.
To add the Water Sensor to the Piper network I removed its back console and pulled off the plastic battery saver tab. Side by side, I opened the Piper app, went to the Settings folio, clicked Wireless Accessories, and tapped Add and then Start. Adjacent, I pressed the Wake Up button until the red LED was illuminated, so pressed the Z-Wave button and waited while the app searched for the sensor. After five minutes I pressed Cancel and went back to the Wireless Accessories folio and institute the sensor listed with an OK status. The same matter happened when I installed the Piper Z-Moving ridge LED Bulb and seems to exist a minor flaw in the app. I reattached the sensor to the panel and completed the installation.
In testing, the Piper Water Sensor worked like a amuse. It reacted immediately when a single driblet of water came in contact with the probe, or when the probe was submerged in a puddle. I received email, text, and push notifications for every event, likewise as recorded messages on my phone. The sensor integrated seamlessly with the Piper'due south camera and siren and triggered the low-cal bulb without fail.
Conclusion
If you've already got asurveillance camera and want to take reward of its Z-Wave wireless capabilities, the Piper H2o Sensor is a useful addition that can help protect your home against water damage. With push, e-mail, text, and voice alerts, you'll know if there'due south a water problem no thing where you are. As with the D-Link mydlink Wi-Fi Water Sensor DCH-S160, the Piper Z-Moving ridge H2o Sensor is more than expensive than a traditional h2o sensor, but a typical h2o sensor won't telephone call y'all, send alerts to multiple locations and trusted friends, and trigger other home automation devices.
Source: https://sea.pcmag.com/consumer-electronics-reviews-ratings-comparisons/9156/icontrol-networks-piper-z-wave-water-sensor
Posted by: henryrocklairling1983.blogspot.com
0 Response to "Icontrol Networks Piper Z-Wave Water Sensor - Review 2022"
Post a Comment